PipLedger
Today's forex newsNFP, CPI, FOMC and other high-impact eventsEconomic calendarCalendar →

NAS100 Lot Size Calculator

Position size for Nasdaq 100 CFDs, also called US100 or USTEC. Enter your broker's contract size, your risk and your stop in points.

Loading prices…

Lot Size

Size your position so a stop loss costs exactly what you are willing to risk.

Risk per trade
1 pip = 0.0001 price move

Contract settings
These match most brokers. If yours differs, change them here and every calculator uses your numbers.

Disclaimer

Results are estimates for planning only. Your broker's prices, leverage, contract sizes and swap rates decide the real numbers, so check them in your trading platform before you place a trade. Trading forex and CFDs on margin carries a high risk of losing money.

NAS100, US100 and USTEC are the same index

All three names are the Nasdaq 100 index as a CFD. Brokers simply label it differently. The S&P 500 (US500 or SPX500) and the Dow Jones (US30) are in the instrument list too.

Contract size decides the point value

Index CFDs have no single standard. The contract size in your platform tells you what one point is worth on one lot.

Contract sizePer point, 1 lotPer point, 0.10 lot
1$1$0.10
10$10$1
20$20$2

Lot size = Money at risk ÷ (Stop in points × Contract size)

NAS100 lot size example

A $10,000 account risking 1% ($100) with a 50-point stop: with contract size 1 that is 100 ÷ (50 × 1) = 2.00 lots. With contract size 20 it is 100 ÷ (50 × 20) = 0.10 lots. Same risk, very different lot sizes, which is why the contract size matters.

Margin on NAS100

At 30,600 with contract size 1, one lot is worth $30,600, so it needs $1,530 of margin at 1:20 and $3,060 at 1:10. Funded accounts often use low leverage on indices; the prop firm lot size calculator keeps you inside the margin limit.

Worked examples with different contract sizes

The same $50 of risk and the same 30-point stop need very different lot sizes depending on the contract size. Brokers round the result down to their volume step, which is usually 0.01.

Contract sizeSumResultRounded down
150 ÷ (30 × 1)1.6671.66 lots
1050 ÷ (30 × 10)0.16670.16 lots
2050 ÷ (30 × 20)0.08330.08 lots

These are examples to show the sums. Your account, your stop and your contract size will be different, so type your own into the calculator above.

When the lot size is smaller than the minimum

On a small account the sum can come out below the smallest lot your broker allows. Take a $1,000 account risking 1% ($10) with a 40-point stop and a contract size of 20. The sum gives 10 ÷ (40 × 20) = 0.0125 lots. If the minimum is 0.01 lots, the closest you can trade is 0.01, and the real risk of that trade is 0.01 × 40 × 20 = $8. That is under your limit, so it is fine. If the same sum gave 0.0125 and the minimum was 0.10, the trade would risk far more than you planned, and the right answer would be to skip the trade, or to wait for a setup where a closer stop still makes sense.

Points on an index are not the same as MT5 points

This page counts a point as one whole unit of the index price, so a move from 30,600 to 30,650 is 50 points. Some platforms use the word point for the smallest price step instead. If your broker shows prices like 30,600.25, then MT5's point is 0.01, and a 50-point index stop is 5,000 MT5 points. Measure your stop on the chart in index points and enter that number here.

The same stop means a different percentage over time

For example, a 50-point stop is 0.16% of the price when the index is at 30,600, and 0.20% when it is at 25,000. As the index price rises, a fixed number of points becomes a smaller share of the price. If you copy a stop size from an old trade or an old article, check that it still makes sense at today's level.

Which hours the index trades

The Nasdaq stock market's regular session runs from 9:30 a.m. to 4:00 p.m. New York time. Index CFDs usually trade for most of the day on weekdays, and the details depend on your broker. For traders in India, the New York open is 7:00 p.m. IST while US daylight saving time is on, and 8:00 p.m. IST after the clocks go back, which in 2026 happens on 1 November. Check the trading hours in your broker's Specification, because the CFD can pause for a short daily break.

Before you size a NAS100 trade

  1. Read the contract size, minimum lot and volume step in the symbol Specification.
  2. Place your stop where the trade idea is wrong, then measure the distance to it in index points.
  3. Enter the contract size, your risk and the stop into the calculator, and round the lot size down.
  4. Check the margin figure against your free margin, and against your prop firm's margin rule if you have one.
  5. Remember that fast markets can fill a stop worse than planned, so a gap can cost more than your set risk.

Index CFD mistakes to avoid

  • Assuming every broker uses the same contract size. A trade copied from someone else's screenshot can be ten or twenty times bigger on your account.
  • Counting the stop in MT5 points when the sum expects index points.
  • Rounding the lot size up. Rounding up raises your risk above the amount you chose.
  • Forgetting swap on an index held overnight. Use the swap calculator if you plan to keep it open.

To price a move in dollars, the US30 pip calculator works for NAS100 and US500 as well. To check what a target is worth against your stop, use the risk reward calculator, and for a morning breakout method on an index, see the opening range breakout strategy.

Frequently asked questions

Is US100 the same as NAS100?

Yes. NAS100, US100 and USTEC are all names for the Nasdaq 100 index CFD. Only the label changes between brokers.

How much is 1 point on NAS100?

It depends on your broker's contract size. With contract size 1, one point is $1 per lot; with 20, it is $20 per lot.

Why doesn't the NAS100 price update on its own?

There is no free live index feed the site can use, so you type the current price from your chart. It only affects the margin figure, not the lot size.

What lot size should I use on NAS100?

Divide the money you are willing to lose by the stop distance in index points times your broker's contract size, then round down to the volume step. With $50 of risk, a 30-point stop and contract size 10, the answer is 0.16 lots.

What if the calculated lot size is below my broker's minimum?

Work out the real risk of the minimum lot: lots × stop in points × contract size. If it is above what you planned to lose, use a tighter stop or skip the trade.

Is a point on NAS100 the same as a point in MT5?

Not always. In this calculator a point is one whole unit of the index price. In MT5 the point can be the smallest price step, such as 0.01 when the index is quoted to two decimals.

When does the US stock market open in India time?

The Nasdaq regular session opens at 9:30 a.m. New York time, which is 7:00 p.m. IST during US daylight saving time and 8:00 p.m. IST after it ends. The index CFD usually trades earlier than that, and its hours are set by your broker.

More free calculators

Guides for forex and gold traders

All 88 guides →

Trading psychology

The habits that decide whether a good strategy makes money.

All 14 trading psychology guides